Making a Lightbulb

Intro

Hi, I'm going to introduce you to how to make a flashlight! you know when theres a blackout and your other flashlight is busted up.you can make this in case if that happens. Follow my steps and you'll probably have a nice looking flashlight with you.There are some pictures help you build a working flashlight.this is a way to help our environment instead of going out to buy a flashlight.this would be more funner and educational too.

Supplies Needed to make a Flash Light

• push switch or any other switch
• 2 "D" cell batteries
• 3 separated wires (stripped)
• masking tape (you can get any where)
• glue or glue gun (from a home depot store)
• a small led light(from a flashlight)(or buy at Home Depot)(1.7 to 3 watts)
• an adult to use the glue gun for you if child

Procedures

1. First put one battery and another battery together.with tape. From a negative side to a positive.
2. You should then use pliers to strip the small wires. On all sides.
3. Than you put one wire on the negative side of the battery and one on the positive side of the battery.
4. You should then get a push switch and attach two of the left-over wires to it.
5. First put wire that connects to the negative side of the battery to the metal side of he led bulb and the positive on the bottom.
6. Then you should put glue to attach them.
7. If it does not work you should re-check again
8. But if it still doesn't work then maybe you have to get new batteries or the bulb is to strong for the batteries to work on.
9. If you have made this you are then helping the environment by reusing the objects i have listed before.
10. You should also tape the whole thing so it doesn't break when you have an emergency

This is a great item to build if you have a project comeing or you can make it for yourself if any blackouts accour.

If there are any problems please tell me by listing a comment so I can reply back to you!

Thanks!